|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
10-28-2009, 04:06 AM
|
||||
|
||||
Welcome all new member tired of sites that try go get you for support money
Any new members coming from site below please let me know that's were you came from.
http://www.cadillacforums.com And also welcome to a site that you can post what you want and also are not loaded down with ads on the site and wanting you to support the site to get a free service. Feel free to ask for as many vin checks that you need or post up service info ? In the gm spec area. Thanks Henry
__________________
2006 2500HD LBZ Ex-Cab 4x4 GT4202R,5" MBRP Exh,EFI Live,PPE lift pump, BigDipper Trans with 1055.11.53 @ 116.92 1.66 60' RIP LBZ 6/1/08@5:44pm she was strong 1979 Camaro Z28,400sbc bowtie block,Je blower piston,Lunati rods and crank,Brodix weldtech ported heads,Accell DFI and a sheetmetal intake, Paxton Novi 2000, old setup made 880 at the crank.J&W ultra Glide,J&W 5500 converter,With new mods should run in the mid 8's @150 area old setup at 3660lb went 10.67@133.80 on dot tires. 
|
|
#2
02-03-2010, 04:33 AM
|
||||
|
||||
So funny that some sites have to do this to members they fear.
vBulletin Message | Sorry, but the server load is extremely high at the moment. We are aware of this issue and are working on obtaining a third server to handle the load. Please consider helping us meet this goal by becoming a Supporting Member if you are not one already. Also, if you know of any automotive business that would benefit by advertising here, please let them know about us. Our forum is just as busy as other automotive forums that have 50 to 100 advertisers. Since Cadillac doesn't have nearly as large an aftermarket (especially in regards to performance) we only have about 10. We cannot continue to survive without consistent financial support. This site was started as a hobby site and grew far beyond anyone's expectations. It's also far more expensive than we ever thought it would become. So please, bear with us - we're doing the best we can to remedy this issue... Thank you for your patience, Sal C.
__________________
2006 2500HD LBZ Ex-Cab 4x4 GT4202R,5" MBRP Exh,EFI Live,PPE lift pump, BigDipper Trans with 1055.11.53 @ 116.92 1.66 60' RIP LBZ 6/1/08@5:44pm she was strong 1979 Camaro Z28,400sbc bowtie block,Je blower piston,Lunati rods and crank,Brodix weldtech ported heads,Accell DFI and a sheetmetal intake, Paxton Novi 2000, old setup made 880 at the crank.J&W ultra Glide,J&W 5500 converter,With new mods should run in the mid 8's @150 area old setup at 3660lb went 10.67@133.80 on dot tires.
|
|
#3
05-14-2010, 03:39 PM
|
|||
|
|||
|
Coming from CadillacForums.com
You asked to be notified if I am a member of CadillacForums.com. Yes I am.
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
